Removing The Heat Sink Screws; Figure; Removing The Heat Sink; Removing The Fan - Toshiba Satellite X200; Satellite X205 Maintenance Manual

4.24 Fan and CPU

4.23 Fan and CPU
Removing the Fan and CPU
To remove the fan, heat sink, and CPU, you must first remove the display assembly, keyboard,
top cover and system board, and then follow the steps below:
1. Turn the system board upside down. Remove the six M2.5x3 screws from the heat sink.
Follow the order indicated by the numbers on the heat sink in reverse to remove the
screws.
2. Lift and remove the heat sink from the system board.
Satellite X200/ X205 Series Maintenance Manual

Figure 4-68

Removing the heat sink screws

Figure 4-69

Removing the heat sink

[CONFIDENTIAL]
4 Replacement Procedures
4-57