Toshiba Satellite M100 Maintenance Manual page 164

4 Replacement Procedures
Installing the Wireless LAN Unit
To install the wireless LAN unit, follow the steps below and refer to the figures in the preceding
section.
1. Remove the black M2.5x3 screw securing the wireless LAN door, and then remove the
wireless LAN door as described previously.
CAUTION: Do not touch the connectors on the wireless LAN unit or on the
computer. Debris on the connectors may cause malfunction.
2. Place the wireless LAN unit in the wireless LAN holder and gently press down. The two
latches of the holder will snap close to hold the unit.
3. Attach the white antenna to the main connector, and the black antenna to the Aux connector.
4. Use the black M2.5x4 screw to secure the wireless LAN door.
4-38
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual