Jenn-Air W10253462A User Manual page 12

4. Draw and cut a 6¼" (15.8 cm) diameter hole (option 1 shown).
A. Option 1
B. Option 2
5. Position blower motor in cabinet opening and mount blower
motor to the floor.
Option 1
B
A
A. Inlet from range
B. Exhaust outlet
6. Connect vent system to blower motor outlet (option 1 shown)
with 4 - #8 x ¾" hex head screws provided.
A
B
C
A. Inlet
B. Vent clamp
C. Floor
D. Vent system
7. Go to the "Electrical Connection" section.
12
B
A
Top View
Option 2
A
D
Left or Right Side Venting
1. Mark cabinet side for either a left or right side vent hole
location.
2. Mark and cut a 5½" (13.9 cm) diameter hole in the desired
cabinet side.
B
3. Mark and cut a 14" x 11" (35.6 x 27.9 cm) opening in the floor
of the same cabinet as the vent hole opening.
A
B. 14" (35.6 cm) from left side of cabinet
A
B
A. 31 " (79.2 cm) to top of cabinet
B. 18" (45.7 cm) from back wall
A
A. 5½" (13.9 cm) diameter hole
Top View
B
A. 11" (27.9 cm) from front of cabinet