PC Chips Motherboard User Manual page 34

SuperIO Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phonex-AwardBIOS CMOS Setup Utility
Onboard FDC Controller
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
X
: Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values
Onboard FDC Controller
This option enables the onboard floppy disk drive controller.
Onboard Serial Port 1
This option is used to assign the I/O address and interrupt request (IRQ) for
onboard serial port 1/2.
Onboard Parallel Port
This item enables or disables the onboard parallel port, and assigns a port address.
The Auto setting will detect the available address.
Parallel Port Mode
Use this item to select the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or
BPP (Bi-Directional Parallel Port).
• ECP Mode Use DMA (3): When the onboard parallel port is set to ECP
mode, the parallel port can use DMA3/1.
Press <Esc> to return to the main menu setting page.
Chapter 3: BIOS Setup Utility
SuperIO Device
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
Menu Level
[SPP]
3
F6: Fial-Safe Defaults F7: Optimized Defaults
31
Item Help