Features And Controls - Husqvarna 1365GN Operator's Manual

Husqvarna 1365gn portable generator operator's manual
Hide thumbs Also See for 1365GN:
Table of Contents

Advertisement

Available languages

Available languages

Features and Controls

Read this Operator's Manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
K
A - Fuel Tank — Capacity of seven (7) U.S. gallons (26.5 l).
B - Circuit Breakers (AC) — Push-to-reset circuit breakers
are provided to protect the generator against electrical
overload.
C - Hour Meter — Displays and records how many hours
your generator has run (up to 9,999.9).
D - 12 Volt DC,10 Amp Receptacle — Recharge a discharged
12 Volt automotive type battery through this receptacle.
E - Idle Control Switch — Use this switch to turn the idle
control feature on and off.
F - 120 Volt AC, 20 Amp, GFCI Duplex Receptacles — May
be used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical,
lighting, appliance, tool, and motor loads.
G - 120/240 Volt AC, 30 Amp Locking Receptacle — May
be used to supply electrical power for the operation of
120 and/or 240 Volt AC, 30 Amp, single phase, 60 Hz
electrical, lighting, appliance, tool and motor loads.
H - Grounding Fastener — Consult your local agency having
jurisdiction for grounding requirements in your area.
10
J - Spark Arrester Muffler — Exhaust muffler lowers engine
noise and is equipped with a spark arrester screen.
K - Identification Label — Provides model, revision, and
serial number of generator. Please have these readily
available when calling for assistance.
L - Oil Drain Plug — Drain engine oil here.
M - Recoil Starter — Used to start the engine.
N - Oil Fill Cap — Check and add engine oil here.
P - Engine Switch — Set this switch to "On" before using
recoil starter. Set switch to "Off" to stop engine.
R - Air Cleaner — Protects engine by filtering dust and
debris out of intake air.
S - Choke Rod — Used when starting a cold engine.
T - Fuel Valve — Used to turn fuel supply on and off to
engine.
Items Not Shown:
Engine Identification — Provides model, type and code of
engine. Please have these readily available if calling for
assistance.
T
S
R
P
N
M
L
www.usa.husqvarna.com

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents