Advertisement
External Device Settings
Use the PU/EXT key, MODE key, M dial and SET key in the operation panel of the CPU unit for External Device
communication settings.
Refer to your External Device manual for details.
1
Turn ON the power supply.
2
Press PU/EXT key to select the PU operation mode.
3
Press MODE key to select the parameter setting mode.
4
Display the setting parameter number with M dial.
5
Press SET key to display the current setting value.
6
Set the setting value with M dial.
7
Press SET key to confirm the setting value.
Setting Parameter Number
n1
n2
n3
n4
n5
n6
n7
n11
• Always restart the Eternal Device after changing parameters.
GP-Pro EX Device/PLC Connection Manual
Setting Value
0
(n1)Communication station number
192
(n2)Communication speed
1
(n3)Stop bit length
2
(n4)Parity check presence/absence
1
(n5)Number of communication retries
Any Except 0
(n6)Communication check time interval
---
(n7)Wait time setting
1
(n11)CR, LF selection
47
FREQROL Inverter Driver
Setup Description
Advertisement
