Mitsubishi Electric FREQROL Connection Manual page 35

External Device Settings
Use the MODE key, SET key, up key, and down key in the operation panel of the CPU unit for External Device
communication settings.
Refer to your External Device manual for details.
1
Press MODE key to select the parameter setting mode.
2
Press SET key.
3
Press up key or down key to display the most significant digit of the parameter number.
4
Press SET key.
5
Press up key or down key to display the middle digit of the parameter number.
6
Press SET key.
7
Press up key or down key to display the least significant digit of the parameter number.
8
Press SET key to display the current setting value.
9
Press up key or down key to set the setting value.
10
Press SET key for 1.5 seconds to write the setting value.
Setting Parameter Number
117
118
119
120
121
122
123
124
• Always restart the Eternal Device after changing parameters.
GP-Pro EX Device/PLC Connection Manual
Setting Value
0 Communication station number
192 Communication speed
1 Stop bit length/data length
2 Parity check presence/absence
1 Number of communication retries
Any Except 0 Communication check time interval
9999 Waiting time setting
CR • LF presence/absence selection
1
35
FREQROL Inverter Driver
Setup Description