Advertisement
6
Supported Devices
The following table shows the range of supported device addresses. Please note that the actually supported range
of the devices varies depending on the External Device to be used. Please check the actual range in the manual of
your External Device.
Input address of external device in the dialog below.
1.
Address
2.
Reference
• As shown in the following table, you may need to enter "9999" (meaning an invalid
GP-Pro EX Device/PLC Connection Manual
2
Enter the address.
Available parameter list is displayed.
Click the parameter to use and press "Select", then the address is entered.
parameter setting or the like) depending upon the parameter types. In this case, the
data written and read from the Display is as follows:
Inverter Series
FR-S500/FR-F500J series
Series other than above
1
Inverter Setting
Written Data
---
-1
888
-16
9999
-1
8888
-16
139
FREQROL Inverter Driver
Read Data
(0xFFFF)
-1
(0xFFFF)
(0xFFF0)
-16
(0xFFF0)
(0xFFFF)
-1
(0xFFFF)
(0xFFF0)
-16
(0xFFF0)
Advertisement
