Advertisement
Introduction
This manual describes how to connect the Display and the External Device (target PLC).
In this manual, the connection procedure is described in the sections identified below:
1
System Configuration
This section lists the types of External
Devices and SIO that you can connect.
2
External Devices Selection
Select a model (series) of the External
Device and its connection method.
3
Communication Settings
This section shows setting examples for
communicating between the Display and
the External Device.
4
Setup Items
This section describes communication
setup items on the Display.
Set the Display's communication settings
in GP Pro-EX or in offline mode.
5
Cable Diagrams
This section shows cables and adapters
for connecting the Display and the
External Device.
Operation
GP-Pro EX Device/PLC Connection Manual
"1 System Configuration" (page 3)
"2 External Devices Selection" (page 9)
"3 Communication Settings" (page 10)
"4 Setup Items" (page 58)
"5 Cable Diagrams" (page 62)
2
FREQROL Inverter Driver
Advertisement
