Advertisement
Panelboard General Specifications
Class CTL Panelboards
Class CTL panelboards incorporate physical features which, in
conjunction with the physical size, configuration, or other means
provided in Class CTL circuit breakers, are designed to prevent the
installation of more overcurrent protective poles than that number
for which the device is designed and rated.
Standards
CEC: 2002
NEMA: PB1
Service Entrance Equipment
When a panelboard is used as service entrance equipment, it must
be supplied with the appropriate CSA certification and labelling.
Please consult CSA, CEC and local inspection authorities for
specification and installation guidelines.
Panelboards must be identified as "Service Entrance" at the time
of order entry.
Also panels must include a connector for bonding and grounding
neutral conductor.
Integrated Equipment Short Circuit Rating (Series Ratings)
application of series connected circuit breakers in combination
that allows some breakers to have lower individual interrupting
ratings than the available fault current. This is permitted as long as
the series combination has been tested and certified by CSA.
"Series Rated" must be identified at the time of order entry.
Lighting and Distribution Panels – Type P1
and three-pole breakers with an equivalent number of
one-pole breakers.
connection to copper or aluminum cable.
entrance equipment."
alignment for flush mounted applications.
wire bending and gutter requirements to meet the CEC, NEC,
CSA and UL standards.
to prevent damaging wire insulation.
attachment of trim.
them from the load side cables.
number next to each breaker or provision, are provided
to box without tools.
with concealed hinges, flush lock and a holder for circuit
directory card. Trims are fabricated from code gauge steel
engage the box flange to stabilize and secure the trim
during installation.
for tamper resistance.
Interior – Type P1
sub-feed circuit breaker, up to 250 amperes, without
increasing the enclosure size.
the addition of an appropriate field-installable kit.
versa, while maintaining readability of deadfront labeling.
facilitate connections.
terminals for easy wiring and shortest cable run possible.
Advertisement
