Follow The Checklist Below; Connect Hose And Water Supply To Pump - Hyundai HYW2500P Operator's Manual

-
pre operation checklist
Follow the Checklist Below Prior to Using the Machine Each Time
1. Check to ensure the engine oil is at the proper level.
Use SAE 15W40 Oil
2. Check the 2 handle knobs to ensure they are tight and will not vibrate
loose.
3. Add fuel to the petrol tank - Regular Unleaded Petrol
4. Connect and tighten the garden hose to the garden hose attachment.
** Water must be turned on prior to starting the washer, pull the
spray trigger to ensure water is moving the through the lines and out
the nozzle without any leaks before starting the unit.**
5. Review the safety guidelines in the manual prior to starting the unit.
If you have any issues operating the pressure washer, call the customer ser-
vice line.
Always check the level of the engine and pump oil prior to
starting the washer.
• Failure to do so could cause the engine and pump to seize if the oil is
low or empty.
Connect Hose and Water Supply to Pump Before Starting
DO NOT start your pressure washer without the water
supply turned on.
• Failure to do so will result in damaging the pump from overheating
and void the warranty.
16
WARNING
WARNING
Hyundai Powe