Table of Contents
Advertisement
2)
Make a quick test call. (Press
If...
there's a lot of noise or static
3)
Test any accessory handsets the same way. If you can't get a
dial tone or the handset display says Unavailable, try moving the
handset closer to the base or resetting it (see page 41). Charge
all handsets completely (about 15 hours) before using them.
Installing the Belt Clip
Line up the holes on each side of the handset. To attach the belt
clip, insert into the holes on each side of the handset. Press down
until it clicks. To remove the belt clip, pull either side of the belt clip
to release the tabs from the holes.
Headset Installation
Your phone may be used with the Uniden HS915 headset (included
with XDECT 8055 model). To use this feature, insert the headset
plug into the headset jack. Your phone is ready for hands-free
conversations. Additional headsets are available through Uniden
authorized retailers.
8
END to hang up.)
Try...
see page 39-40 for tips on avoiding
interference.
Hide quick links:
Advertisement
Table of Contents
