Chain Dialing
If you often have to enter a series of digits or a code number
during a call, you can save that code number to a phonebook
entry and use the phonebook to send the code number.
Enter the code number (up to 20 digits) into the phonebook just
like a regular phonebook entry. Be sure to enter the code number
into the phonebook exactly as you would enter it during a call.
When you hear the prompt that tells you to enter the number, open
the phonebook and find the entry that contains your code number.
Press MENU/SELECT to transmit the code. Or, if you change your
mind, use pHONEbOOk/LEfT to close the phonebook.
Finding a Lost Handset
With the phone in standby, press fIND HANDSET/INTErCOM on
the base. Select the handset you want to find (or All to page all
handsets). The paged handset(s) beep for 1 minute or until you press
fIND HANDSET/INTErCOM again or press TALK /FLASH followed by
END on the handset.
30