Place the mounting
4
slots over the pins
on the wall plate.
Plug the adapter into a
6
standard 240V AC
power outlet.
Removing the wall-mount bracket
Pinch the two prongs locked into the
bottom tabs together and push the
bracket up.
Note: Mounting the phone directly on the wall
Be sure the wall is capable of supporting the weight of the phone,
and use the proper type of anchoring device for the wall material.
Insert two #10 screws (minimum length of 35mm, not supplied) into
the wall, 100mm apart.
Leave the screw heads 3mm away from the wall to allow room for
mounting the phone.
Align the mounting slots over the screws and slide the base down
into place as shown above.
10
Slide the base
5
down to lock it
into place.
(To AC outlet)
Wall plate