BMW R 1200 GS Adventure Rider's Manual page 134

Push the air filter into the air
8
filter housing at the bottom,
making sure that the vanes are
132
not bent.
z
Position the air intake pipe on
the air filter housing and push it
into holder 2.
Push retainers 1 into the hold-
ers until they engage with an
audible click.
Cylinders not synchronised.
Make sure the throttle-valve
cable is correctly routed.
Check that the throttle-valve
cable is seated in guide 4 of
the intake and that the throttle
valve is seated against the
stop.
Seat the fuel-tank cover
in holder 7 and install two
screws 6.
Press the side cover at 4
and 5 to engage it in the
holders.
Install screw 3.