BMW R 1200 GS Adventure Rider's Manual page 121

Raise the front wheel, insert
quick-release axle 3 and tight-
en to specified torque.
Quick-release axle in axle
holder
50 Nm
Tighten axle clamping screw 2
to the specified torque.
Clamp screw of quick-
release axle
19 Nm
with BMW Motorrad Integral
OE
ABS II
Insert the ABS sensor into its
bore and install screw 1.
Remove the front-wheel stand.
Ease the brake calipers on to
the brake discs.
Install securing screws 2 on
left and right and tighten to
specified tightening torque.
Brake caliper to slider
tube
30 Nm
Remove the adhesive tape
from the wheel rim.
Braking efficiency is im-
paired if the brake pads are
not correctly bedded against the
discs.
Before riding off, always check
that the brakes bite as soon as
8
119
z