Wheels; Checking Spokes - BMW R 1200 GS Adventure Rider's Manual

Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Measure the tyre tread depth
in the main tread grooves with
wear marks.
Tyres have wear indicators
integrated into the main
tread grooves. The tyre is worn
out when the tyre tread has worn
down to the level of the marks.
The locations of the marks are
indicated on the edge of the tyre,
e.g. by the letters TI, TWI or by
an arrow.
If the tyre tread is worn to minim-
um:
Replace tyre or tyres, as applic-
able.
Checking rims
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Visually inspect the rims for
defects.
Have damaged rims checked
and, if necessary, replaced by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.

Checking spokes

Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Draw the handle of a screw-
driver or a similar instrument
across the spokes and listen
to the notes of the individual
spokes.
If the notes vary:
Have the spokes checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.

Wheels

Tyre recommendation
For each size of tyre BMW
Motorrad tests and classifies
as roadworthy certain makes.
BMW Motorrad cannot assess
the suitability or provide any
guarantee of road safety for other
tyres.
BMW Motorrad recommends
using only tyres tested by BMW
Motorrad.
You can obtain detailed informa-
tion from your authorised BMW
Motorrad dealer or on the Inter-
net at www.bmw-motorrad.com.
Effect of wheel size
on suspension-control
systems
Wheel size is very important as
a parameter for the suspension-
control systems ABS and ASC.
In particular, the diameter and the
width of a motorcycle's wheels
8
115
z