Disassembly And Reassembly; Order Of Disassembly; Disassembly - Hitachi VK-U174 Service Manual

5

Disassembly and Reassembly

5-1 Order of Disassembly

Refer to "Disassembly Flowchart" in Fig. 5-1-1 for the order of
removing components. When reassembling components, use the
reverse order to removal unless otherwise specified.
Note:
When replacing components in the VK-U174/U174E, be sure to
use only those shown in "Replacement Parts List".
Reading Disassembly Flowchart:
After locating the target component in the flowchart, remove all
components of the target in sequence, following the arrows
(routes) from the top of flowchart.

5-2 Disassembly

Information:
Numbers in figures are step numbers in disassemble procedure,
and letters in brackets [
L and R Brackets (Fig. 5-2-1)
1) Remove three screws [A].
2) Release two tabs and remove the L bracket.
3) Remove three screws [A] and remove the R bracket.
] show the types of screw.
3) SCREWS [A]
R BRACKET
[A] M1.7×3 (Black)
Fig. 5-2-1
5 - 1
Component name
L Bracket
R Bracket
CSR Circuit Board
Circuit Board Frame
Camera Frame
PC Circuit Board
Lens Frame S
Lens Frame
SP Circuit Board
Sensor Unit
Image Sensor
Lens
Fig. 5-1-1
CAMERA CHASSIS
1) SCREW [A]
L BRACKET
2) TABS
1) SCREWS [A]
Item
No.
1) to 3)
4) to 7)
8) and 9)
10) and 11)
12) and 13)
14)
15)