Do you have a question about the 109 HappyStart and is the answer not in the manual?
Questions and answers
Denis Redden
February 8, 2025
Cannot refit the side Pannel after assembly as the chain brake has been released
1 comments:
Mr. Anderson
February 11, 2025
To refit the side panel on a Dolmar 109 HappyStart after releasing the chain brake, follow these steps:
1. Ensure the chain brake is released by levering down the brake gate using a screwdriver. 2. Position the clutch drum properly in place. 3. Align the side panel with the mounting points on the chainsaw. 4. Secure the cover plate by inserting and tightening the screws. 5. Make sure the brake band and tension spring are correctly installed and engaged.
If the brake band or tension spring is damaged, replace them before refitting the panel.
Need help?
Do you have a question about the 109 HappyStart and is the answer not in the manual?
Questions and answers
Cannot refit the side Pannel after assembly as the chain brake has been released
To refit the side panel on a Dolmar 109 HappyStart after releasing the chain brake, follow these steps:
1. Ensure the chain brake is released by levering down the brake gate using a screwdriver.
2. Position the clutch drum properly in place.
3. Align the side panel with the mounting points on the chainsaw.
4. Secure the cover plate by inserting and tightening the screws.
5. Make sure the brake band and tension spring are correctly installed and engaged.
If the brake band or tension spring is damaged, replace them before refitting the panel.
This answer is automatically generated