Scanning Area - Canon FAX-L380 Quick Reference Manual

Problem Documents
• To prevent paper jams in the Automatic Document Feeder (ADF), do not use any of the following paper in the
machine:
WRINKLED OR
CREASED PAPER
CARBON PAPER OR
CARBON-BACKED
PAPER
• Remove all staples, paper clips, or any other fasteners before loading the document into the Automatic Document
4
Feeder (ADF).
• Make sure any glue, ink, or correction fluid on the paper is completely dry before loading the document into the
Automatic Document Feeder (ADF).
• If you have a document that will not feed into the machine properly, make a photocopy of the document, then load
the copy instead.

Scanning Area

The margins shown in the illustration below are outside the machine's scanning area. Make sure your
document's text and graphics do not extend into these margins.
4-2
Document Requirements
CURLED OR ROLLED
PAPER
COATED PAPER
A4
MAX. 3.0 mm
TORN PAPER
ONION SKON OR
THIN PAPER
MAX. 4.0 mm
MAX. 4.0 mm
MAX. 4.0 mm