Electrolux EWM21xx Service Manual page 55

Series 6 / 7 washing machines & washer-dryers with electronic control system
Table of Contents

Advertisement

Alarm
E82
PCB faulty (Wrong configuration data). Selector, wiring
E83
PCB faulty (Wrong configuration data). Selector, wiring
Wiring faulty; Faulty control/display board
E91
PCB faulty.
Wrong control/display board;
E92
Wrong PCB (do not correspond to the model).
Incorrect configuration data; PCB faulty.
E93
Incorrect configuration data; PCB faulty.
E94
PCB faulty.
E95
Faulty PCB (Wrong configuration data).
E97
E98
Incompatibility between main board and Inverter.
E9b / E9H Display board.
E9C
Display board.
E9d
Display board.
E9F
PCB.
EH1
Power supply problems (incorrect / disturbance); PCB faulty.
EH2
Power supply problems (incorrect / disturbance); PCB faulty.
EH3
Power supply problems (incorrect / disturbance); PCB faulty.
EHE
Wiring faulty; PCB faulty.
EHF
PCB faulty.
EC1
Solenoid valve faulty/blocked; PCB faulty.
EC3
Wiring faulty; Weight sensor faulty; PCB faulty.
Ed1
Wiring faulty between PCB and WD board; WD board faulty; PCB faulty.
Ed2
Wiring faulty between PCB and WD thermostats; WD board faulty; PCB faulty.
Ed3
Wiring faulty between PCB and WD thermostats; WD board faulty; PCB faulty.
Ed4
Wiring faulty: WD board faulty; PCB faulty.
Drain tube blocked/kinked/too high;
EF1
Drain filter dirty/blocked.
Excessive detergent dosing; drain tube kinked/blocked;
EF2
Drain filter dirty/blocked.
EF3
Water leaks onto base frame; water control system defective.
EF4
Tap closed, water pressure too low.
SOI/DT 2007-11 dmm
Possible fault
55/69
Action/machine status
----------------
Cycle cancelled.
----------------
Cycle interrupted.
Cycle interrupted.
Cycle interrupted.
Cycle interrupted.
Cycle interrupted.
Cycle interrupted.
Cycle interrupted.
Cycle interrupted.
Cycle interrupted.
Cycle interrupted.
Wait for frequency nominal
conditions.
Wait for voltage nominal conditions.
Wait for voltage nominal conditions.
Safety drain cycle – Cycle stopped
with door open.
Safety drain cycle – Cycle stopped
with door open.
Cycle interrupted with door closed.
Drain pump functions always (5 min.,
then it stops for 5 min. etc.)
----------------
Cycle interrupted.
Cycle interrupted with door open.
Cycle interrupted with door open.
Cycle interrupted with door open.
Warning displayed at the end of cycle
(specific LED).
Warning displayed after 5 attempts or
by the specific LED.
Machine drains and cycle stops
---------------------------
Reset
RESET
START/RESET
RESET
OFF/ON START
OFF/ON
OFF/ON
RESET
RESET
OFF/ON
ON/OFF RESET
ON/OFF RESET
ON/OFF RESET
OFF/ON
OFF/ON
OFF/ON
OFF/ON
RESET
RESET
RESET
START/RESET
OFF/ON
RESET
RESET
RESET
START/RESET
RESET
ON/OFF RESET
RESET
599 70 39-88

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ewm25xx

Table of Contents