Electrolux EWM21xx Service Manual page 11

•
Button no. 7: this button is configurable, has the function of
DELAYED START. During the cycle selection phase, it is possible
to select a delayed start from 30' to 20 hours (30'
2h 3h... 20h
the last hour, the time decreases minute by minute.
•
LED wash phase indicators:
The LEDs L16, L17, L18 are configurable and are used as indicators of the wash phases.
Pre-wash
Wash
Pre-wash/Wash
Rinses
Spin
Rinses / Spin
Drain
Extra rinse
Rinse-hold
Current cycle
End of cycle
Door locked
Child lock
Drying
•
LCD
The following information appear on the LCD:
The duration of the washing programme, which appears after
having selected it. This time corresponds to that necessary for the
maximum wash load for each programme type. After starting the
programme the time decreases minute by minute.
The end of the programme is indicated by three zero flashing (when
it is possible to open the door).
The stop of the appliance with water in tub, after the programmes
with RINSE HOLD option, is displayed by one zero flashing. The LED
that indicates the door remains lit and the LED of the START/PAUSE
button switches off.
The anti-crease phase at the end of the drying cycle is displayed by
one zero flashing.
SOI/DT 2007-11 dmm
0h) and the time displayed in the LCD, during
Lights during selection mode if the programme includes the pre-wash phase,
and during the execution of the pre-wash
Lights during selection mode if the programme includes the wash phase, and
during the execution of the wash
Lights during selection mode if the programme includes the pre-wash or wash
phases, and during the execution of these phases
Lights during selection mode if the programme includes rinse phases, and
during the execution of the rinses
Lights during selection mode if the programme includes the spin phase, and
during the execution of the spin
Lights during selection mode if the programme includes rinses and spin and
during the execution of these phases
Lights during selection mode if the programme includes the drain phase, and
during the execution of the drain
Lights when this option has been memorized (if included in the cycle)
Lights if the programme includes the rinse-hold option and at the end of the
cycle, when the appliance stops with water in the tub
Lights during selection mode
Lights during execution of the cycle and switches off during the drain phase if
selected
Lights when the programme has been completed
Lights when the door lock prevents opening of the door, and switches off when
the door can be opened. Flashes when the interlock is about to release the
door (may be seen if PTC devices are used, as these require one or two
minutes before releasing the lock)
Lights when the child safety is on and all buttons are deactivated
Lights during selection mode if the programme includes the drain phase and
during the execution of this phase
60' 90'
Indications
11/69
599 70 39-88