Electrolux EWM21xx Service Manual page 26

- Reading/Cancellation of the last
10
----- ----
alarm
(*) In most cases, this time is sufficient to check the heating. However, the time can be increased by repeating the phase without draining the
water: pass for a moment to a different phase of the diagnostics cycle and then back to the heating control phase (if the temperature is higher
than 80°C, heating does not take place).
(**) The check at the maximum speed occurs without control of the FUCS and no clothes have to be inserted inside the appliance.
26/69
SOI/DT 2007-11 dmm 599 70 39-88