Power Up Control - Asus DiGiMatrix AB-V10 User Manual

4.5.1 Power Up Control

AC Power Loss Restart [Disabled]
This allows you to set whether or not to reboot the system after power
interruptions. [Disabled] leaves your system off while [Enabled] reboots the
system. [Previous State] sets the system back to the state it was before
the power interruption. Configuration options: [Disabled] [Enabled]
[Previous State]
Power Up On PCI Device [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through
a PCI modem. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled]
This parameter allows you to use specific keys on the keyboard to turn on
the system. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Space Bar]
[Ctrl-Esc] [Power Key]
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may
configure your system to power up at a certain time of the day by selecting
[Everyday] or at a certain time and day by selecting [By Date].
Configuration options: [Disabled] [Everyday] [By Date]
The Automatic Power Up feature does not work if the system is powered
down by an operating system, such Windows
Configuration and Power Interface (ACPI) support enabled.
ASUS DiGiMatrix
®
98, that has Advanced
69