Asus DiGiMatrix AB-V10 User Manual page 143

9. Click Finish when the wizard
completes creating the
connection.
10. The Network Connections
window displays the created
connection. Return to the
Wireless Settings utility. Select
the created connection from the
Available Network Connections,
then drag it to the Internet field.
Refer to the steps on page 140
to enable ICS.
Network Bridge
Host computers with multiple network adapters may use the network bridge
function to connect several LAN segments. A LAN segment is a physical
connection between a host computer and a client computer. Network
bridging is a cost-effective method of connecting LAN segments since it
does not require expensive hardwares such as routers and technical
expertise for configuring Internet protocol (IP) addresses. Network bridge is
essential in enabling ICS among wireless clients in a home network.
You must have Administrator privileges before you can create a network bridge.
To bridge a wired network connection to the wireless LAN adapter:
1. Open the Wireless Settings
utility. Select Config from the
property window, then select the
Soft AP tab.
2. Select a network connection
from the Available Network
Connections box, then drag the
connection to the Internet field.
Click Apply.
ASUS DiGiMatrix 143