Asus DiGiMatrix AB-V10 User Manual page 122

Direct internet connection
To enable ICS if your computer directly connects to the Internet:
1. Select the number of IP address
assigned by your Internet
Service Provider (ISP). Click
Next.
The wizard will instruct you to
enable ICS or create a network
bridge if you are assigned two or
more IP addresses.
2. The setup wizard automatically
selects your broadband network
connection. Check Enable
Firewall to secure your network
from unauthorized access. Click
Next.
3. Enable ICS following steps 2 to
10 in the section "Internet
connection via another computer
or residential gateway".
Broadband connection that is always on
To enable ICS if you have an existing broadband network that is always on
(DSL, cable modem, or LAN):
1. Select whether your computer
directly connects to the Internet
or through another computer or
residential gateway. Click Next.
122 Chapter 5: Starting up