Tuning Into An Fm Radio Station; Presetting A Station; Adjusting The Volume - Asus DiGiMatrix AB-V10 User Manual

5.5.4 Tuning into an FM radio station

To tune into an FM station:
1. Select Radio FM Device as your audio source.
2. Scan the radio frequency by pressing the PLAY/PAUSE button. The
scanning stops when a station is detected. The LED panel displays
the radio frequency.
3. Press the NEXT or PREVIOUS button or the
remote controller to select a preset station, if any.
CD/DVD Device 1
Radio FM Device
play media : radio FM
Player Status : Playlist Mode

5.5.5 Presetting a station

To preset a station:
1. Press the PLAY button to scan available radio stations.
2. After you have selected a radio station, press the PLAY/PAUSE
button for at least 2 seconds until a preset number blinks on the LED
panel. You may also press the
3. Press the NEXT or PREVIOUS button or the
remote controller to select a preset number (1-9) for the selected station.
4. Press the PLAY button to confirm the preset station.

5.5.6 Adjusting the volume

You may adjust the volume by turning the Volume Dial clockwise (volume
up) or counterclockwise (volume down). You may also press the
on the remote controller. Press the volume dial to MUTE sound.
ASUS DiGiMatrix
button on the remote controller.
buttons on the
buttons on the
or
95