Installing A Hard Disk Drive - Asus DiGiMatrix AB-V10 User Manual

2.4 Installing a hard disk drive

The DiGiMatrix system supports one UltraATA133 IDE hard disk drive
(HDD).
To install a hard disk drive:
1. Remove the two metal cover screws. Keep the screws for later use.
2. Use the hand slot to slide the metal cover toward the rear panel. Lift
the metal cover after the side hooks are disengaged from the HDD
tray rail and optical drive shield.
Set your hard disk drive as Master device before connecting the IDE cable
and power plug. Refer to the HDD documentation on how to set the drive
as a Master device.
22
1
Side hooks
2
Hand slot
Chapter 2: Basic Installation
Side hooks