Digi+ Power Control - Asus ESC700 G2 User Manual

4.4.2

DIGI+ Power Control

UEFI BIOS Utility - Advanced Mode
Main Ai Tweaker
CPU Load-line Calibration
CPU Current Capability
VCCSA Load-line Calibration
VCCSA Current Capability
CPU Voltage Frequency
CPU Spread Spectrum
CPU Power Duty Control
CPU Power Phase Control
DRAM-AB Current Capability
DRAM-AB Voltage Frequency
DRAM-AB Power Phase Control
DRAM-CD Current Capability
DRAM-CD Voltage Frequency
DRAM-CD Power Phase Control
CPU Load-Line Calibration [Auto]
CPU Load-line is defined by Intel spec and affects CPU voltage. The CPU working voltage
will decrease proportionally to CPU loading. Higher value could get higher voltage and good
overclocking performance, but increase the CPU thermal. This item allows you to adjust the
voltage range from the following percentages to boost the system performance:
0% (Regular), 25% (Medium), 50% (High), 75% (Ultra High), 100% (Extreme).
Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU specifiation.
CPU Current Capability [Auto]
This item provides wider total power range for overclocking. A higher value brings a wider
total power range and extends the overclocking frequency range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Do not remove the thermal module while changing the DIGI+ Power Control
related parameters . The thermal conditions should be monitored.
Some of the following items are adjusted by typing the desired values using the
numeric keypad and pressing the <Enter> key. You can also use the <+> and
<-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
ASUS ESC700 G2
Advanced
Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc.
Monitor Boot
Ultra High [X.M.P.] When XMP is enabled BLCK
frequency, CPU ratio and memory
100% parameters will be auto optimized.
Auto
100%
Auto
Disabled
T.Probe
Standard
100%
→←: Select Screen
Auto
↑↓: Select Item
Enter: Select
Optimized
+/-: Change Opt.
F1: General Help
100%
F2: Previous Values
F3: Shortcut
Auto
F5: Optimized Defaults
F6: ASUS Ratio Boost
Optimized
F10: Save
F12: Print Screen
Exit
Tool
ESC: Exit
4-21