Asus DiGiMatrix AB-V10 User Manual page 49

4. Insert the USB flash disk or the floppy disk that contains the new
BIOS file into a USB port or a USB floppy disk drive. You will receive
the error message, "WARNING! Device not ready." if you proceed
to step 5 without the disk in the drive or without the USB flash disk.
5. At the prompt, "Please Enter File Name for NEW BIOS: _", type in
the BIOS file name that you downloaded from the ASUS website,
then press <Enter>.
EZ Flash will automatically access drive A to look for the file name
that you typed. When found, the following message appears on
screen.
[BIOS Information in File]
BIOS Version:
WARNING! Continue to update the BIOS (Y/N)? _
If you accidentally typed in a wrong BIOS file name, the error
message, "WARNING! File not found." appears. Press <Enter> to
remove the message, then type in the correct file name. Press
<Enter>.
6. At the above prompt, type Y to continue with the update process.
Pressing N exits the EZ Flash screen and reboots the system without
updating the BIOS.
The following prompts appear if you typed Y.
Flash Memory:
Update Main BIOS area
7. Press Y to update the main BIOS area.
DO NOT shutdown or reset the system while updating the BIOS area!
Doing so may cause system boot failure.
8. When the update process is done, the message, "Press a key to
reboot" appears. Press any key to reboot the system with the new
BIOS.
ASUS DiGiMatrix
P4SQ Boot Block
SST 49LF004
(Y/N)? _
49