JBL DCR600 II Owner's Manual page 49

Configuring the DVD600
Figure 7
To enter a password, you may either enter the
four-digit number directly, using the Numeric
Keys – , or you may use the
Buttons y
to select the number
/
⁄ ¤
for a position, and then press the
›
to move to the next position. Note that as each
number is entered, it will turn to a solid circle
when you move to the next position to protect
the password's privacy. When all four numbers
of the password have been entered, press the
Enter Button .
After the password has been entered once, a
second set of data entry boxes will appear, asking
you to confirm the entry (see Figure 11). Using
the same method described earlier, enter the
password again. When all four numbers have
been repeated, press the Enter Button
set the password in the DVD changer's memory.
If the two passwords do not agree, an "Incorrect
Password" message will appear to ask you to
try entering the number again.
Once this password is entered, you will need to
use this four-digit number to view a disc when
the rating of the disc exceeds the settings
entered in the Ratings Menu. If a password has
been entered, it will also be required in order to
change the settings range in the Ratings Menu.
Finally, the password is required if you wish to
unlock the system again to permit access to the
Ratings Menu.
If you have no other changes to make after set-
ting this default, press the Menu Button z
to remove the Setup Menu from the screen, or
press the Play/Pause Button
begin or resume playback.
Clearing Passwords
Once a password has been entered, the system
remains locked until the password is cleared. To
clear a password so that the ratings may be
changed or to permit any movie to be viewed
regardless of ratings, you must be viewing the
Setup Menu (Figure 1), which is available by
pressing the Menu Button z while the unit
is in the Stop mode. At the Setup Menu, press
the Button
¤
highlighted (Figure 7). As the system is locked,
you will first be asked to enter the password
previously set. Enter that password using the
Numeric Keys
press the Enter Button
To clear the password lock once you have
entered the correct password, press the
Button so that the words "Clear
¤
Password" are highlighted in light blue (Figure 8).
Next, press the Enter Button
the process. Note that the wording for "Clear
Password" will dim as a confirmation that the
system is now unlocked. Press the
` to return to the main menu.
Button
Figure 8
If you have no other changes to make after set-
to
ting this default, press the Menu Button z
to remove the Setup Menu from the screen, or
press the Play/Pause Button
begin or resume playback.
Changing the Password
If you feel that the password has become known
to an unauthorized person, you may change the
password without unlocking the system. To
change a password, you must be viewing the
Setup Menu (Figure 1), which is available by
pressing the Menu Button z while the unit
is in the Stop mode. At the Setup Menu, press
the Button
¤
highlighted. As the system is locked, you will
first be asked to enter the password previously
set (Figure 9). Enter that password using the
Numeric Keys
to press the Enter Button
Figure 9
DVD Changer
II
until the Password option is
–
and then
.
Figure 10
to complete
To change the password, press the
highlighted in light blue (Figure 10). Next, press
Button
‹
the Enter Button
appears (Figure 7), enter the new four-digit
password directly by using the Numeric Keys
/
⁄
for a position, and then press the
to move to the next position. Note that as each
number is entered, it will turn to a solid circle
when you move to the next position to protect
the password's privacy. When all four numbers
of the password have been entered, press the
Enter Button
to
Figure 11
After the password has been entered once, a
second set of data entry boxes will appear, ask-
ing you to confirm the entry (Figure 11). Using
the same method described above, enter the
until the Password option is
password again. When all four numbers have
been repeated, press the Enter Button
set the password in the memory (Figure 12). If
the two passwords do not agree, an "Incorrect
– and then
Password" message will appear to ask you to try
.
entering the number again.
Figure 12
Button
¤
so that the words "Change Password" are
. On the next screen that
– , or you may use the
Buttons y
to select the number
¤
Button
›
.
(continued)
to
49