IC901 MICROPROCESSOR……………….32 REMOTE CONTROL FUNCTIONS….….…10 ELECTRICAL PARTS LIST…………………38 OPERATION………………………………….14 PACKAGING…………………………………44 BASIC TROUBLESHOOTING………...…..21 PCB DRAWINGS………………………….…45 EXPLODED VIEW……………………..…….24 POWER SUPPLY……………………………50 EXPLODED/MECHANICAL PARTS LIST…25 SCHEMATICS…….………………..……..….55 SERVICE BULLETIN JBL2002-01….……...26 WIRING DIAGRAM…….…………………….63 JBL Consumer Products 250 Crossways Park Dr. 9/2005 Woodbury, New York 11797 Rev2...
DVD600II Technical Specifications DVD600 Playback Media: 5-inch (12cm) or 3-inch (8cm) DVD-Video: Region 1, single or dual sides/layers, linear PCM, Dolby Digital or DTS CD, CD-R, CD-RW: Linear PCM Audio Video CD (VCD): MPEG-1 Video, Linear PCM Audio Video Section:...
Page 3
DVD600II DATE:SEP 26.2001 1. Audio * Test Disc : YEDS 7(Sony),EIAJ CD-1 Item Nominal Spec Limite Spec Test Conditions Test Track Data Coaxial(75Ω) Output Level 0.5 + 0.05V(p-p) 2. Video(75 Terminated) --->NTSC VIDEO * Test Disc : Navigation Vol 1 FOR SYSTEM(DVD-NF200)
DVD600II Quick Installation Diagrams BASIC INSTALLATION: Your TV must at a minimum have a composite video input (this connector usually has a yellow-colored core), and Left (usually has a white-colored core) and Right (red-colored core) Stereo audio preamp-level RCA outputs. All wires for this hookup are included.
Page 5
DVD600II Quick Installation Diagrams ALTERNATE INSTALLATION FOR BETTER PICTURE QUALITY: Your TV must have an S-Video input, and Left (usually has a white-colored core) and Right (red-colored core) Stereo audio preamp-level RCA outputs. Two pieces of S-Video cable are not included and should be purchased separately.
Page 6
DVD600II Quick Installation Diagrams ALTERNATE INSTALLATION FOR BEST PICTURE QUALITY: Your TV must have Y/Pr/Pb component video inputs (three separate RCA connectors with red-, blue- and green-colored cores), and Left (usually has a white-colored core) and Right (red-colored core) Stereo audio preamp-level RCA outputs. The component video cable is not included and should be purchased separately.
DVD600II DVD600 Front Panel Controls 96KHz 24bit Play/Pause: Press to begin playback of Main Power Switch: Press this button Disc Skip: Press twice in quick succes- a disc, or to momentarily pause playback. If a to apply power to the DVD600 .
DVD600II DVD600 Front Panel Information Display 96KHz 24bit disc plays at 16x normal speed. For CDs, only Disc Type: Lights to show the type of disc Intro: Lights when the IntroScan function the first three Fast Search modes are available.
DVD changer. Press the Main Button h to return the remote to control of the DCR600 receiver. IMPORTANT NOTE: The remote control for the JBL Cinema ProPack 600 may be pro- grammed to control up to eight devices, includ- ing the DCR600 and DVD600 .
Page 11
3) It will switch to the page for the tape deck may find it convenient to connect your televi- u All Off: This feature of the JBL One-Click™ whose codes have been programmed into the sion to this input, particularly since it does not...
Page 12
DVD600II DVD600 is selected, this button is used to When a DVD encoded with multiple-angle to select the channel being adjusted, change the subtitle choice. For other video information is playing, press to change the followed by the Set Button .
Page 13
DVD600II Preset Up/Down/Slow-Play NOTE: When any of the following buttons Play/Pause Button is pressed – Buttons: When the tuner is in use, press these is pressed while the remote has again, even if the unit has been turned off in...
If the tray drawer or carousel tray DVD-Audio discs include audio tracks in the then the System Power Control or the appears to be stuck, contact your local JBL PCM, Dolby Digital or other formats which the f or Play/Pause Open/Close Button authorized service center.
Page 15
DVD600II Operating the DVD600 DVD Changer • Turn the unit on by pressing the System pressed. Note that the fast-play speeds • In the 1/2 Speed Slow mode, both the ‹‹ and ›› Playback Mode Indicators Power Control , if it has not already vary for CD discs and DVDs.
Page 16
DVD600II Operating the DVD600 DVD Changer screen display system that serves the dual pur- • On some discs, when you select the DVD Selecting Titles and Chapters menu during the playback of a movie, the disc pose of showing you the current status of the Some discs contain more than one title.
Page 17
DVD600II Operating the DVD600 DVD Changer will be replaced with two dashes (– –). allow audio track change while a disc is playing. until the player is turned off. When the unit When the Audio Button t is pressed on this is turned on for subsequent play, the default 5.
Page 18
DVD600II Operating the DVD600 DVD Changer Disc Type: Shows the type of disc being played. 6. To play a track during IntroScan, press the Buttons ` 2. Press the until the ‹ › Play/Pause Button camera icon with the letters “Ang” below it (fifth...
Page 19
DVD600II Operating the DVD600 DVD Changer MP3 Disc Playback NOTES ON MP3 PLAYBACK Step 3: Use the Navigation Buttons ⁄ ¤ • The Fast Forward and Reverse Search modes When the DVD600 reads a disc and recognizes to highlight the first track to be placed are not available during MP3 playback.
Page 20
DVD600II Operating the DVD600 DVD Changer There are two versions of the VCD format: an Using the On-Screen Status Bar • Once the menu options appear on the screen, make your selection by pressing the Numeric early version which is simply called “VCD” and...
• Amplifier is in Protection mode • Contact your local JBL service center. due to internal problems No sound from any speaker • No audio signal is being transmitted •...
Page 22
DVD600II Troubleshooting DCR600II and DVD600II (Cont'd) No sound from one speaker • No audio signal is being transmitted • Check all wires and connections between the DCR600 to the speakers speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured.
Page 23
DVD600II Troubleshooting DCR600II and DVD600II (Cont'd) Disc does not play • Disc loaded improperly • Load disc label-side up. • Incorrect disc type • Check to see that disc is CD, CD-R, CD-RW, DVD-Movie, MP3 or Video CD; other types will not play.
PC AC PUN COVER TOP DVD600II METAL BK 55202510 PC AC PUN SHIELD COVER SMPS EU DV505 55190140 PC AC MLD BUTTON SHAFT POWER SW DVD600II -- 55190100 PC AC DEC BUTTON POWER DVD600II -- 55184690 PC AD ASY SMPS MODULE DV-C503...
(Version 1.11 to 1.13). Verify that the unit will play regular music CD’s successfully. 2) Verify the serial number range of the DVD600II (see below). If the unit falls into the affected serial number range, it is a candidate for the software upgrade. Additionally, the software version can be checked by following the simple procedure on page 2.
Page 27
DVD600II Version Check DVD600II With the DVD600II in Stand By mode, (no display, Orange indicator ON): Press BACK SEARCH and FORWARD SKIP buttons on the front panel simultaneously for at least 2 seconds and then release them. In the display: Chapter Display will indicate the revision, e.g. current Rev 1.13 will be indicated as 113.
Subject: Unit Says In Standby Mode In the event you receive a DVD600II DVD player with the complaint: “The unit stays in standby mode (amber indicator), and will not switch ON, either with the remote control or the front panel button”,...
The DVD600II has a dimming feature that may be ON; this should be checked first. On the front panel, left of the display, is the dimmer button. With the unit ON, press the button repeatedly and cycle through these stages in the following order: FULL BRIGHTNESS HALF BRIGHTNESS OFF FULL BRIGHTNESS.
Subject: Opening Tray Without Power In the event you receive a DVD600II without power, and you have a need to open the tray manually: On the bottom panel there is a 1 3/8” opening* covered by a black square plastic dust cover. Carefully, with a sharp tool, peel it away from the opening and remove it.
DVD600II NOTE: Ordinarily DVD600II Power Supply module, part# 55184690, is supplied only as a complete unit. Supplied Schematic and Parts list are included only for reference when the above part is not available and/or repair to component level is necessary. Part...