JBL DCR600 II Owner's Manual page 41

Configuring the DCR600
^.
7. Press the Set Button
8. Select the Dolby Digital mode either by press-
ing the front panel Surround Mode Selector
7 or by pressing the Surround Mode
Selector t on the remote until
DOLBY DIG appears in the Main
Information Display U.
9. Press the Delay Button &
remote or front panel. The words
S DELAY TIME appear in the
Main Information Display U.
Buttons y
10. Press the
⁄ / ¤
remote once, so that C DELAY TIME
appears in the Main Information Display
U or in the on-screen display.
^.
11. Press the Set Button
Buttons y
12. Press the
⁄ / ¤
remote or the Selector Buttons 5 on the
front panel until the desired delay time for
the center channel appears in the display.
^ to enter the
13. Press the Set Button
setting into the receiver's memory.
on the
on the
on the
Receiver
II
41