Quick Guide To Using The Jbl Cinema Propack - JBL DCR600 II Owner's Manual

Quick Guide to Using the JBL Cinema ProPack 600

The DVD600 can play discs in the following
II
formats:
• Both 5-inch (12cm) and 3-inch (8cm) discs
• CD audio discs • DTS audio discs
• CD-R audio discs • CD-RW audio discs
• DVD movie discs
• VCD video compact discs
• Discs containing MP3 compressed-audio files
However, it cannot play:
• DVD discs with a Region Code other than
"1" or "All"
• DVD discs using PAL format video
• DVD-ROM data discs
• DVD-RAM discs • CD-I discs
• CD-G discs • SVCD discs
• Photo CD discs • CD-R/RW data discs
Notes on DVD-Audio discs:
• The DVD600 is not capable of playing selec-
II
tions in the DVD-Audio format. However, many
DVD-Audio discs include audio tracks in the
PCM, Dolby Digital or other formats which the
DVD600 is capable of playing. You may need
II
to press the Title Button x rather than the
Menu Button z in order to access these
formats.
• Some DVD-Audio discs display a still picture
while a selection is playing. Sometimes, this
picture may disappear when play is stopped and
the DVD600 is placed in the Resume mode. To
II
restore the picture, fully stop play by pressing
the Stop Button twice before contin-
uing play.
Plug the Power Cord into an unswitched
AC outlet.
Press the Main Power Switch
DVD600 so that it latches and the Power
II
Indicator turns amber, indicating that the
unit is in the Standby mode. Turn the unit on by
pressing the System Power Control Button
. The Power Indicator
green.
Open the Disc Tray by pressing the
Open/Close Button and insert up to
five discs in the tray locations, using the
Disc Skip Button to rotate the
carousel to access all locations. Make sure
each disc is loaded with the label side up, and
that it is seated correctly in its location.
12
When you close the drawer, the DVD600
automatically engage the On Screen Library™
(patent pending) system, which will read and
identify each disc, then display a menu identify-
ing the type (DVD, CD or MP3) and title (if avail-
able) by numbered disc location. The process
can take approximately one minute. You may
press the Stop Button
Buttons y
⁄ / ¤
Exit button, and press the Set Button
interrupt this process. Alternatively, you may
Buttons y
use the ⁄ ¤
/
desired disc, even if the disc has not yet been
identified, and press the Set Button
begin play. Also, if you closed the disc tray by
pressing one of the Direct Access Buttons
, the DVD600
II
play that disc.
Pressing a Numeric Key
while the On Screen Library is displayed will
remove it from the display, but will not change
the current disc or start play of any disc.
Whichever type of disc is playing, make sure
that you have selected DVD as the input source
by pressing d on the remote,
on the DCR600
II
or ! on the front panel of the receiver until
DVD is indicated.
Skip to another disc that was previously loaded
in the DVD600 by pressing the Disc Skip
II
Button . If you press a Numeric Key
33 34 36
35 37
containing a disc within three seconds, the
DVD600 will skip directly to that disc.
II
Otherwise, the DVD600
available disc in order. Press the Disc Skip
Button twice in succession for a
faster jump to the next disc.
You may also use JBL's exclusive On Screen
on the
Library system later during the listening session
to display all discs currently loaded by pressing
the On Screen Library Button
the current disc is stopped. If you had previously
interrupted the On Screen Library system while
will turn
it was in the process of identifying the loaded
discs, it will resume that process at this time.
Press the DVD Button d and use the
Buttons y
31
to select a disc and the
28
Set Button to begin playing that disc.
Directly access any track on the current disc
while it is playing or in Pause mode by pressing
one or more of the Numeric Keys
.
will At this time you may find it convenient to quickly
II
program your remote control to have the capa-
bility of adjusting the volume control for the
DCR600
Press the DVD Selector d and the Mute
Button c at the same time, then press the
Volume Up Button s, then press the MAIN
Selector h.
, or use the
31
to scroll down to the
In addition to the transport keys located in the
28
, to
lower portion of the remote, when in DVD
mode, you may use the arrow-key cluster in the
31
to scroll to a
middle of the remote to access these basic
functions:
28
to
Fast-Forward
Fast-Reverse
Chapter +
will immediately begin to
Chapter –
Play/Pause
33 40
–
When a CD is playing, the arrow keys will not
operate the transport controls while the Status
Banner is displayed. However, if you press the
Status Button e, the banner will disappear
and pressing an arrow key will affect the trans-
port as described above. The Status Banner will
then return to the display, and the arrow keys
will again have no effect on the transport.
Therefore, you should use the regular transport
controls at the bottom of the remote
when playing CDs.
For most discs, the DVD600
for any disc position
automatically select the correct surround mode.
To make sure that audio in the DTS audio format
is correctly processed, you must choose that for-
will play the next
II
mat as the default in the DVD600
Simply stop play of the disc, and enter the setup
menu by pressing Menu z on the remote.
Use the
to Digital Audio Output. Press
the Set Button
screen will pop up, allowing you to choose from
, as long as PCM, Dolby Digital or DTS outputs. Use the
⁄ / ¤
press the Set Button
You do not need to reset the audio output for
other formats. The DCR600
⁄ ¤ automatically process PCM, Dolby Digital and
/
DTS signals correctly. Press the Menu Button
z to exit the menu screen. If you press the
Menu Button z while the disc is playing, you
can access the disc's menu to choose the DTS
format there as well.
33 – 40
II
while it is set to control the DVD600
II
29
Right Arrow
Left Arrow `
Up Arrow y
31
Down Arrow
28
Set
and DCR600
II
setup menu.
II
Buttons y
to scroll down
⁄ / ¤
to select this option, and a
Buttons y
to highlight DTS, then
to select this choice.
and DVD600
II II
.
II
–
will
II
will