Cables And Adapters; Mounting Accessories; Mounting The Transmitter Or Receiver; Tabletop Use - Extron electronics DTP DVI 330 User Manual

Cables and Adapters

Cable
DVID SL Pro Series — DVI male-to-male cable, various lengths
HDMIF-DVID-M — HDMI female to DVI-D male adapter

Mounting Accessories

Mounting kit
RSF 123 3.5-inch deep 1U rack shelf kit (transmitter only)
RSB 123 3.5-inch deep 1U rack shelf (transmitter only)
RSU 126 6-inch deep 1U universal rack shelf kit
RSB 126 6-inch deep 1U basic rack shelf
RSU 129 9.5-inch deep 1U universal rack shelf kit
RSB 129 9.5-inch deep 1U basic rack shelf
MBU 125 under-desk mount kit
MBD 129 through-desk mount kit
PMK 350 low profile projector mount kit, white
ZipClip 100 mounting kit for PS Series power supplies

Mounting the Transmitter or Receiver

ATTENTION:
The 1-inch high, quarter rack width DTP DVI 330 transmitter or receiver can be placed on
a table, mounted in a rack, or mounted under a desk or table. The receiver can also be
mounted on a projector bracket.

Tabletop Use

Affix the included rubber feet to the bottom of the unit and place it in any convenient
location.

Mounting kits

Mount the unit using any of the mounting kits listed above, in accordance with the directions
included with the kit. For rack mounting, see
page.
• Installation and service must be performed by authorized personnel only.
• Avoid ground potential differences between the transmitter and receiver installation
sites, which can lead to equipment damage or a missing or unstable picture. If
a potential difference cannot be avoided, remove the ground connection between
the units and locally power both units (see
next page).
DTP DVI 330 Tx/Rx Transmitter and Receiver • Installation and Operation
Disconnecting the Ground
UL Rack-Mounting Guidelines
Part Number
26-649-nn
26-616-01
Part Number
60-190-20
60-604-21
60-190-10
60-604-11
60-190-01
60-604-02
70-077-01
70-077-02
70-563-03
101-002-01
on the
on the next
11