Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 450 4+ Series User Manual

When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Selecting an antenna
4
Selecting a channel
5
Setting the
Clock Mode.
6
Viewing the
HD Connection Guide.
7
Enjoy your TV.
If You Want to Reset This Feature...
O
MENUm → Setup → Plug & Play → ENTERE

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold
Press the ▲ or ▼ button, then press the ENTERE button.
y If the antenna is connected to
ANT 2 IN (CABLE), select Cable.
y If both ANT 1 IN (AIR) and
After selecting the antenna source to memorize, select Search. The TV will begin
memorizing all of the available channels. For more information, refer to
Channel → Auto Program (p. 13).
y Press the ENTERE button at any time to interrupt the memorisation process.
Set the Clock Mode automatically or manually.
y Auto: Allows you to select time zone.
y Manual: Allows you to manually set the current date and time (p. 20).
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
VHF/UHF Antenna
or
MENU for 5 sec.
(AIR), select Air and if it is connected to
ANT 1 IN
ANT 2 IN (CABLE) are connected, select Air+Cable.
Cable
ANT OUT
POWER
P
INF
7
English