Hide thumbs Also See for 450 Series:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Contacte con SAMSUNG WORLD WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención
al Cliente.
Country
Customer Care Center 
ARGENTINE
0800-333-3733
0800-124-421
BRAZIL
4004-0000
CHILE
800-SAMSUNG(726-7864)
COLOMBIA
01-8000112112
COSTA RICA
0-800-507-7267
ECUADOR
1-800-10-7267
EL SALVADOR
800-6225
GUATEMALA
1-800-299-0013
HONDURAS
800-7919267
JAMAICA
1-800-234-7267
MEXICO
01-800-SAMSUNG(726-7864)
NICARAGUA
00-1800-5077267
PANAMA
800-7267
PUERTO RICO
1-800-682-3180
REP. DOMINICA
1-800-751-2676
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
VENEZUELA
0-800-100-5303
Web Site
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com.co
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/mx
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
BN68-01964A
BN68-01963A-00
Plasma TV
user manual
imagine
the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/register
Model
Serial No.

Advertisement

Table of Contents
loading

Summary of Contents for Samsung 450 Series

  • Page 1 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLD WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.
  • Page 2 On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty. Other countries The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.
  • Page 3 User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 23 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image.
  • Page 4: Table Of Contents

    Contents Connecting and Preparing Your TV PC Display ■ List of Features ................5 ■ Using Your TV as a Computer (PC) Display ......25 ■ Checking Parts ................5 ■ Display Modes ................. 26 ■ Viewing the Control Panel ............6 ■...
  • Page 5: Connecting And Preparing Your Tv

    Connecting and Preparing Your TV List of Features • Adjustable picture settings that can be stored in the TV’s memory. • Automatic timer to turn the TV on and off. • A special sleep timer. • Excellent Digital Interface & Networking With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box) needed.
  • Page 6: Viewing The Control Panel

    Viewing the Control Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. The product color and shape may vary depending on the model. If you touch the front panel button, the each button will be operated.
  • Page 7: Viewing The Connection Panel

    Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously, such as Blu-Ray DVD Players or a VCR. The product color and shape may vary depending on the model. TV Rear Panel TV Side Panel (DVI) 1 POWER IN...
  • Page 8: Remote Control

    Audio Program (SAP broadcast). $ Use these buttons in the DMA, Anynet + modes. ( : This remote can be used to control recording on Samsung recorders with the Anynet + feature) Installing Batteries in the Remote Control ❑ 1. Lift the cover at the back of the remote control upward as shown in the figure.
  • Page 9: Connections

    Connections Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennaswith300ΩFlatTwin Leads below.” Ifyourantennahasoneleadthatlookslikethis,see“Antennaswith75ΩRoundLeads.” If you have two antennas, see “Separate VHF and UHF Antennas.” Antennaswith300ΩFlatTwinLeads ❑ Ifyouareusinganoff-airantenna(suchasaroofantennaorrabbitears)thathas300Ω twin flat leads, follow the directions below. 1.
  • Page 10 Connecting to a Cable Box that Descrambles Some Channels ❑ If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.) 1.
  • Page 11: Connecting A Dvd / Blu-Ray Player Or Cable Box / Satellite Receiver (Set-Top Box) Via Hdmi

    Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. 1.
  • Page 12: Connecting A Dvd / Blu-Ray Player Or Cable Box / Satellite Receiver (Set-Top Box) Via Component Cables

    Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD/Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) to your TV.
  • Page 13: Connecting A Vcr

    Using the HDMI Cable ❑ 1. Connect an HDMI Cable between the HDMI IN (1, 2(DVI), or 3) jack on the TV and the HDMI jack on the camcorder. TV Rear Panel TV Side Panel Camcorder HDMI Cable (Not supplied) Each Camcorder has a different back panel configuration.
  • Page 14: Connecting An Amplifier / Dvd Home Theater

    Connecting an Amplifier / DVD Home Theater 1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [L-AUDIO-R] jacks on the Amplifier/ DVD Home Theater. When an audio amplifier is connected to the AUDIO OUT [R-AUDIO-L] jacks terminals : Decrease the volume of the TV, and adjust the volume level with the Amplifier’s volume control.
  • Page 15: Connecting A Pc

    Connecting a PC Using the D-Sub Cable ❑ 1. Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on your computer. . Connect a PC Audio Cable between the PC/DVI AUDIO IN jack on the TV and the Audio Out jack of the sound card on your computer.
  • Page 16: Operation

    Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. It may take a while for your TV to power on. Changing Channels Using the Channel Buttons ❑...
  • Page 17: Using The Tools Button

    Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes depending on which external input mode you are viewing. 1. Press the TOOLS button. The Tools menu will appear. .
  • Page 18: Viewing The Menus

    Viewing the Menus Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions. 1. Press the MENU button. The main menu is displayed on the screen. Its left side has the following icons: Picture, Sound, Channel , Setup, Input. .
  • Page 19: Plug & Play Feature

    Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently. The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running. The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
  • Page 20: Channel Control

    Channel Control Storing Channels Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels arememorized,usetheCH▲orCH▼buttontoscanthroughthechannels.Thiseliminatestheneedtochangechannelsby entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels and adding and deleting channels.
  • Page 21: Picture Control

    Picture Control Changing the Picture Settings Mode ❑ Picture You can select the type of picture which best corresponds to your viewing requirements. Mode : Standard Picture Cell Light • Dynamic: Select a high-definition picture for bright environments. Contrast Brightness •...
  • Page 22 White Balance  You can adjust the color temperature for more natural picture colors. Advanced Settings • R-Offset: Adjust the low level red intensity. Black Tone : Off Picture Dynamic Contrast : High • G-Offset: Adjust the low level green intensity. Gamma •...
  • Page 23 Temporary image retention may occur when viewing a static image on the set for more than two hours. After selecting “Wide Zoom” mode: Press the ► button to select , then press the ENTER button. Press the ▲ or ▼ button to move the picture up and down. After selecting “Zoom”...
  • Page 24: Using The 3D Function

    If you play a game or watch TV while wearing the 3D glasses for long periods of time, you may experience eyestrain or a headache. 3D glasses (including the Emitter) not manufactured by Samsung may not be supported. If you find the screen flickering while the 3D function is used, darken the room for the best viewing conditions.
  • Page 25: Pc Display

    However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. First, click on Control Panel on the Windows start menu.
  • Page 26: Display Modes

    Display Modes If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing.
  • Page 27: Sound Control

    Sound Control Changing the Sound Settings Mode ❑ Sound You can select the sound mode to best suit the programming you’re watching. Mode : Standard • Standard: This sound mode is for general purposes. Picture Equalizer SRS TruSurround HD : Off •...
  • Page 28 Speaker Select ❑ When you watch TV with it connecting to a Home theater, turn the TV speakers off so Sound you can listen to sound from the Home theater’s (external) speakers. Mode : Standard Picture Equalizer • External Speaker: Uses the external speakers(Home Theater) to output sound. SRS TruSurround HD : Off •...
  • Page 29: Function Description

    Function Description Configuring the Setup Menu Language ❑ You can set the menu language. Setup Plug & Play Picture Language : English ChildLock→Off/On ❑ Time Child Lock : On This feature allows you to prevent unauthorized users, such as children, from watching Sound Change PIN unsuitable program by muting out video and audio.
  • Page 30 GameMode→Off/On ❑ When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu. When the Game Mode is On  • Picture mode is automatically changed to Standard and cannot be changed. •...
  • Page 31: Viewing The Picture In Picture (Pip)

    Viewing the Picture in Picture (PIP) You can display a sub picture within the main picture of set program or video input. In this way, you can watch the picture of set program or video input from any connected equipment while watching the main picture. You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.
  • Page 32: Setting The Time

    Setting the Time Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Time ❑ Setup 1. Press the MENU button to display the menu. Plug &...
  • Page 33: Source List / Edit Name

    Source List / Edit Name Source List ❑ Input Use to select TV or other external input sources such as DVD / Blu-Ray players / Cable Source List : TV Picture Edit Name Boxes / Satellite / receivers (Set-Top Box) connected to the TV. Use to select the input Anynet + (HDMI-CEC) source of your choice.
  • Page 34: Anynet

    Anynet + is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet + system can be used only with Samsung devices that have the Anynet + feature. To be sure your Samsung device has this feature, check if there is an Anynet + logo on it.
  • Page 35: Setting Up Anynet

    Setting Up Anynet + Anynet + is a function that enables you to control all connected Samsung devices Input that support Anynet + with your Samsung TV’s remote. Source List : TV Picture Edit Name Anynet + (HDMI-CEC) Press the TOOLS button to display Tools menu.
  • Page 36: Recording

    In Anynet + mode, the color buttons may not work properly. operations may differ depending on the device. Recording You can make a recording of a TV program using a Samsung recorder. 1. Press the TOOLS button. Press the ENTER E button to select Anynet + (HDMI-CEC). View TV .
  • Page 37: Listening Through A Receiver (Home Theater)

    Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker. 1. Press the TOOLS button. Press the ENTER E button to select Anynet + (HDMI-CEC). View TV . Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off. Select Device If your receiver supports audio only, it may not appear in the device list.
  • Page 38: Appendix

    Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-00-SAMSUNG. Problem Possible Solution Poor picture quality. Try another channel.
  • Page 39: Preparation Before Installing The Wall-Mount

    1. Install the Wall Mount with a torque range of 15kgf·cm or less. Use care as the parts can be damaged if the torque is out of the specified range. [② . Accessory Kit contains Holder–Ring ] for installing other company’s Wall-Mount on Samsung TV. (Case B) [① Screw down the hole ] when installing wall-mount on the wall.
  • Page 40: Securing The Tv To The Wall

    Install the product so the required distances shown in the figure are kept. When using a stand or wall-mount, use parts provided by Samsung Electronics only. If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
  • Page 41: Wall Mount Kit Specifications (Vesa)

    Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
  • Page 42: Specifications

    Specifications Model Name PL4B450B1 PL50B450B1 Screen Size (Diagonal) 42 inch 50 inch PC Resolution 1 024x768 @ 60 Hz 1 360x768 @ 60 Hz Sound (Output) 10W x 2 10W x 2 Dimension (W x H x D) 41.5 x 25.9 x 2.9 inches 48.0 x 29.4 x 2.9 inches Body (1 055.5 x 660 x 74 mm)
  • Page 43 This page is intentionally left blank.
  • Page 44 Tenga cuidado en la selección y duración de los formatos de televisión utilizados para la visualización. La garantía limitada de Samsung no cubre el envejecimiento desigual de la PDP como resultado de la selección y uso de formatos, así como otras imágenes retenidas.
  • Page 45 Instrucciones para el usuario Retención de imágenes en la pantalla No deje imágenes fijas visibles (como las de un videojuego) en el panel de la pantalla de plasma durante mucho tiempo, ya que se podría producir la retención de la imagen en la misma. Este fenómeno de retención de imágenes también se denomina “quemadura de pantalla”.
  • Page 46 Índice Conexión y preparación del televisor Pantalla de PC ■ Listado de características ............5 ■ Uso del televisor como una pantalla de ordenador (PC) ..25 ■ Comprobación de los componentes .......... 5 ■ Modos de pantalla ..............26 ■...
  • Page 47 Conexión y preparación del televisor Listado de características • Valores ajustables de la imagen que se pueden almacenar en la memoria del televisor. • Temporizador automático para encender o apagar el televisor. • Temporizador de desconexión especial. • Excelente interfaz digital y capacidad de trabajo en red: El sintonizador digital HD incorporado permite ver las emisiones HD que no exigen una suscripción sin que sea necesario disponer de un receptor de televisión por cable/satélite (decodificador).
  • Page 48 Aspecto general del panel de control Los botones de la parte inferior derecha del panel controlan las funciones básicas del televisor, incluidos los menús en pantalla. Para utilizar las funciones más avanzadas debe usarse el mando a distancia. El color y la forma del producto pueden variar según el modelo. Si toca el botón del panel frontal, se activan los botones.
  • Page 49 Aspecto general del panel de conexiones Use los terminales del panel de conexión para conectar componentes de A/V que estarán disponibles permanentemente, como un reproductor de Blu-ray/DVD o un aparato de vídeo. El color y la forma del producto pueden variar según el modelo. Panel posterior del TV Panel lateral del TV (DVI)
  • Page 50 : Este mando a distancia se puede 2 BOTONES NUMÉRICOS usar para controlar la grabación de las Permiten cambiar de canal. grabadoras de Samsung con la función Anynet + ). Se usa para seleccionar un canal superior a % TV 100.
  • Page 51 Conexiones Conexión de las antenas de VHF y UHF Si su antena tiene un juego de cables con este aspecto, consulte “Antenas con cables planosdoblesde300Ω” a continuación. Si la antena tiene un cable con este aspecto, consulte “Antenasconcablescoaxialesde75Ω”. Si tiene dos antenas, consulte “Antenas de VHF y UHF separadas”. Antenasconcablesplanosdoblesde300Ω...
  • Page 52 Conexión al decodificador de cable que decodifica algunos canales ❑ Si su decodificador de cable decodifica únicamente algunos canales (como, por ejemplo, canales de suscripción), siga las instrucciones que se incluyen a continuación. Necesitará un separador de señales de dos vías, un conmutador RF (A/B) y cuatro extensiones de cable de antena.
  • Page 53 Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) a través de HDMI Esta conexión sólo se puede realizar si hay un terminal de salida de HDMI en el dispositivo externo. Esta conexión proporciona una imagen de la mayor calidad. 1.
  • Page 54 Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) a través de los cables de componentes Los terminales del panel posterior del televisor facilitan la conexión de un reproductor de DVD/Blu-ray o receptor por cable/ satélite (decodificador) al TV. 1.
  • Page 55 Mediante el cable HDMI ❑ 1. Conecte un cable HDMI entre el terminal HDMI IN (1, 2(DVI), 3) del televisor y el terminal HDMI de la videocámara. Panel lateral del TV Panel posterior del TV Videocámara Cable HDMI (No suministrado) Cada videocámara tiene una configuración diferente del panel posterior.
  • Page 56 Conexión de un amplificador/DVD para Home Cinema 1. Conecte los cables de audio entre los terminales AUDIO OUT [R-AUDIO-L] del televisor y los terminales AUDIO IN [L-AUDIO-R] del amplificador/DVD para Home Cinema. Cuando conecte un amplificador de audio a los terminales AUDIO OUT [R-AUDIO-L]: Disminuya el volumen del TV y ajuste el nivel del volumen con el control del volumen del amplificador.
  • Page 57 Conexión a un PC Uso del cable D-Sub ❑ 1. Conecte un cable D-Sub entre el terminal PC IN [PC] del televisor y el terminal de salida PC del ordenador. . Conecte un cable de audio PC entre el terminal PC/DVI AUDIO IN del televisor y el terminal Audio Out de la tarjeta de sonido del ordenador.
  • Page 58 Funcionamiento Encendido y apagado del televisor Pulse el botón POWER del mando a distancia. También puede usar el botón POWER del televisor. El televisor puede tardar unos segundos en encenderse. Cambio de canales Utilización de los botones de canal ❑ Pulse los botones CH o CH para cambiar de canal.
  • Page 59 Uso del botón TOOLS Se puede usar el botón TOOLS para seleccionar rápida y fácilmente las funciones que se usan con más frecuencia. El menú Herramientas cambia según el modo de entrada externo que se está viendo. 1. Pulse el botón TOOLS. Aparece el menú Herramientas. .
  • Page 60 Visualización de los menús Antes de utilizar el televisor, siga los pasos que se explican a continuación para aprender a desplazarse por el menú a fin de seleccionar y ajustar las diferentes funciones. 1. Pulse el botón MENU. El menú principal se muestra en la pantalla. En el lado izquierdo hay los siguientes iconos: Imagen, Sonido, Canal, Configuración, Entrada.
  • Page 61 Función Plug & Play Cuando el televisor se enciende por primera vez, los valores se inician correlativamente de forma automática. El salvapantallas se activa si durante más de 1 minuto no hay ninguna entrada desde el teclado del mando a distancia mientras Plug & Play está en ejecución.
  • Page 62 Control de los canales Almacenamiento de canales El televisor puede memorizar y almacenar todos los canales disponibles aéreos o por cable. Una vez memorizados los canalesdisponibles,puedeexaminarlosmediantelosbotonesCH▲oCH▼.Deestemodo,noesnecesariointroducirdígitos para cambiar los canales. Para memorizar los canales hay tres pasos: seleccionar una emisora de origen, memorizar los canales y añadir o suprimir canales.
  • Page 63 Control de la imagen Cambio del tamaño de la imagen Modo ❑ Puede seleccionar el tipo de imagen que mejor cumpla sus requisitos de visualización. Imagen • Dinámico: Selecciona una imagen de alta definición para entornos muy Modo : Normal iluminados.
  • Page 64 Balance de blanco Configuración avanzada  Se puede ajustar la temperatura del color para conseguir colores más naturales. Tono del negro : Apagado Imagen Contraste Dinám. : Alto • Bal. Rojo: Ajusta la intensidad del rojo en un nivel bajo. Gamma •...
  • Page 65 Puede producirse una retención temporal de imagen cuando se ve una imagen estática durante más de dos horas. Después de seleccionar el modo “Zoomancho”: Pulse el botón ► para seleccionar ( ) y pulse el botón ENTER Pulse los botones ▲ o ▼ para desplazar la imagen hacia arriba o abajo. Después de seleccionar el modo “ZOOM”: Seleccione ( ) pulsando los botones ◄...
  • Page 66 Las gafas 3D (incluido el emisor) que no hayan sido fabricadas por Samsung pueden no ser compatibles. Si la pantalla parpadea cuando se usa la función 3D, se debe oscurecer la iluminación ambiental o apagar la lámpara fluorescente para ver la pantalla en las mejores condiciones.
  • Page 67 (En caso contrario, póngase en contacto con el fabricante del ordenador o con el distribuidor de Samsung.) 1. Primero, haga clic en Panel de control en el menú de inicio de Windows.
  • Page 68 Modos de pantalla Si la señal del sistema es igual al modo de señal estándar, la pantalla se ajusta automáticamente. Si la señal del sistema no es igual al modo de señal estándar, ajuste el modo consultando la guía del usuario de la tarjeta de vídeo; de lo contrario, puede no haber señal de vídeo.
  • Page 69 Control del sonido Cambio de la configuración del sonido Modo ❑ Sonido Puede seleccionar el modo de sonido que mejor se ajuste al programa que está viendo. Modo : Normal Imagen Ecualizador Normal: Este modo de sonido es de aplicación general. •...
  • Page 70 Seleccionar altavoz ❑ Sonido Cuando se ve el televisor conectado a un sistema Home Cinema, se debe apagar el Modo : Normal altavoz del televisor para que la salida de audio del televisor utilice los altavoces del Imagen Ecualizador Home Cinema (externos). SRS TruSurround HD : Apagado Sonido Multi-track : Estéreo...
  • Page 71 Descripción de las funciones Configuración del menú de configuración Idioma ❑ Configuración Se puede configurar el idioma de los menús. Plug & Play Imagen Idioma : Español Bloqueo→Apagado/Encendido ❑ Tiempo Bloqueo : Encendido Sonido Esta función permite bloquear el vídeo y el audio para evitar que los usuarios no Cambiar Código Subtítulo autorizados (por ejemplo, los niños) puedan ver programas poco recomendables.
  • Page 72 ModoJuego→Apagado/Encendido ❑ Si se conecta a una consola de videojuegos como PlayStationTM o XboxTM, podrá obtener sensaciones más realistas seleccionando el menú de juegos. SielmodoJuegoestáencendido  • El modo Imagen cambia automáticamente a Normal y no se puede cambiar. • El modo Sonido cambia automáticamente a Favorito y no se puede cambiar.
  • Page 73 Visualización de imagen sobre imagen (PIP) Puede mostrar una imagen secundaria dentro de la imagen principal del programa establecido o de la entrada de vídeo. De esta forma puede ver la imagen del programa establecido o de la entrada de vídeo desde cualquier equipo conectado mientras ve la imagen principal.
  • Page 74 Configuración de la hora Para usar las diferentes funciones del temporizador del televisor es necesario configurar el reloj. Asimismo, se puede comprobar la hora mientras se ve la televisión. (Pulse el botón INFO.) Tiempo ❑ Configuración 1. Pulse el botón MENU para ver el menú. Plug &...
  • Page 75 Lista de Entradas/Editar Nombre Lista de Entradas ❑ Entrada Se utiliza para seleccionar TV u otras fuentes de entrada externas como reproductores Lista de Entradas : TV DVD/Blu-ray/receptores por cable/ Imagen Editar Nombre Anynet + (HDMI-CEC) satélite (decodificadores) conectados al televisor. Permite seleccionar la fuente de Sonido entrada que se prefiera.
  • Page 76 Samsung. El sistema Anynet + se puede utilizar sólo con los dispositivos Samsung que tengan la función Anynet + . Para asegurarse de que el dispositivo de Samsung tenga dicha función, compruebe si lleva el logotipo Anynet + .
  • Page 77 Configuración de Anynet+ Anynet+ es una función que permite controlar, con el mando a distancia del televisor Samsung, todos los dispositivos de Samsung conectados que sean compatibles con Entrada Anynet+ . Lista de Entradas : TV Imagen Editar Nombre Anynet + (HDMI-CEC) Pulse el botón TOOLS para mostrar el menú...
  • Page 78 Las funciones pueden variar según el dispositivo. Grabando La grabadora de Samsung permite efectuar una grabación de un programa de televisión. 1. Pulse el botón TOOLS. Pulse el botón ENTERE para seleccionar Anynet+ (HDMI-CEC). Ver TV 2. Pulse los botones ▲ o ▼ para seleccionar Grabar inmediatamente y pulse el botón ENTERE.
  • Page 79 Escucha a través de un receptor (Home Cinema) Se puede escuchar sonido a través de un receptor en lugar de hacerlo mediante el altavoz del TV. 1. Pulse el botón Pulse el botón el botón TOOLS. Pulse el botón ENTERE para seleccionar Anynet+ (HDMI-CEC). Ver TV .
  • Page 80 Resolución de problemas Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones. Si ninguno de los consejos funciona, póngase en contacto con el centro de atención al cliente de Samsung o llame al 1-00-SAMSUNG.
  • Page 81 Preparación antes de instalar el montaje mural Caso A. Instalación del montaje mural SAMSUNG Caso B. Instalación del montaje mural de otra empresa 1. Instale el montaje mural con un par de apriete de 15 kgf cm o menos. Tenga en cuenta que las piezas se pueden dañar si el par de apriete es diferente del especificado.
  • Page 82 Instale el producto a la distancia requerida como se muestra en la ilustración. Cuando utilice un soporte o un montaje mural, use sólo las piezas proporcionadas por Samsung Electronics. Si utiliza piezas proporcionadas por otros fabricantes, podría tener problemas con el producto o éste se podría caer con el riesgo de cuasar lesiones personales.
  • Page 83 Samsung no se hace responsable de este tipo de accidentes. Samsung no se hace responsable de daños o lesiones personales cuando se usa un montaje mural que no es VESA o que no cumple las especificaciones, o si el cliente no sigue las instrucciones de instalación del producto.
  • Page 84 Especificaciones Nombre del modelo PL4B450B1 PL50B450B1 Tamaño de pantalla (diagonal) 42 pulgadas 50 pulgadas Resolución de PC 1 024x768 @ 60 Hz 1 360x768 @ 60 Hz Sonido (salida) 10W x 2 10W x 2 Dimensiones (An. x Al. x Pr.) 41.5 x 25.9 x 2.9 pulgadas 48.0 x 29.4 x 2.9 pulgadas Cuerpo principal...

This manual is also suitable for:

430 series

Table of Contents