Samsung 450 4+ Series User Manual page 19

Audio Language
t
(digital channels only)
Change the default value for audio languages.
✎
You can only select a language among the ones being
broadcasted.
Multi-Track Sound (MTS)
■ Mono: Choose for channels that are
broadcasting in mono or if you are having
difficulty receiving a stereo signal.
■ Stereo: Choose for channels that are
broadcasting in stereo.
■ SAP: Choose to listen to the Separate
Audio Program, which is usually a foreign-language
translation.
✎
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■ Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select (External Speaker /
TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎
When Speaker Select is set to External Speaker.
x
TV Speaker: Off, External Speaker: On
✎
When Speaker Select is set to TV Speaker.
x
TV Speaker: On, External Speaker: On
✎
If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
■ Audio Format: During the reception of a digital TV
t
■ Audio Delay: Correct audio-video sync problems, when
MTS
FM Transmitter
(Not available in some locations)
You can listen to TV sound from FM receiver speaker by
transmitting audio signals by FM frequencies.
✎
Connecting a FM Transmitter
Insert FM Transmitter Module into the Socket which is
located at the back side of TV.
■ FM Transmitter (Off / On): Turns FM transmitter on/off.
■ FM Frequency: Sets FM transmitter frequency.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
For more detailed information, refer to "FM Transmitter
Setup". (p. 33)
TV Side Panel
FM Transmitter
19
English