Lubrication Points And Types Of Lubricant; Tightening Torque - Hitachi G 18SCY Technical Data And Service Manual

The internal wire of stator
shall pass this groove.
(6) Mount the cord clip as shown in Fig. 17 being careful of the direction.
The internal wire with tube of stator shall pass this groove.

8-3. Lubrication Points and Types of Lubricant

Pinion chamber of the Gear Cover Ass'y [5] <5> ............. ALVANIA grease EP (LF) O 35 g

8-4. Tightening Torque

Tapping Screws (W/Flange) D4 x 16
[50] <50> [61] <62> ................................................................ 2.0
Seal Lock Hex. Socket Hd. Bolt M5 x 14 [1] <1> .................... 2.9
Tapping Screw (W/Flange) D5 x 35 (Black) [2] <2> ............... 3.4
Hex. Socket Hd. Bolt (W/Flange) M5 x 16 [32] <32> .............. 7.8
Special Nut M10 [6] <6> ......................................................... 15.3
Machine Screw M5 x 10 [25] <25> ......................................... 5.9
Cord dia.: Over 8.5 mm dia.
Cord clip mounting diagram
Fig. 16
Cord dia.: Max. 8.5 mm dia.
Fig. 17
Generously rub grease onto the gear, pinion and
inner circumference of metal.
0.5 N
0.5 N
0.7 N
1.5 N
35 N
1.5 N
--- 17 ---
The internal wire of stator
shall pass this groove.
m (20 5 kgf cm, 1.5
• •
m (30 5 kgf cm, 2.2
• •
m (35 7 kgf cm, 2.5
• •
m (80 15 kgf cm, 5.8
• •
m
(150 30 kgf cm, 10.8
• •
m (60 15 kgf cm, 4.3
• •
0.4 ft-lbs.)
0.4 ft-lbs.)
0.5 ft-lbs.)
1.1 ft-lbs.)
2.2 ft-lbs.)
5.1 ft-lbs.)