Setting Up Tens/Nms Custom Programme - Verity Medical NeuroTrac IFC Rehab Operation Manual

5.3. Setting up TENS/NMS Custom programme.

Custom TENS programme (PC1)
1. Select PC1 by pressing TENS/NMS PROG. button
2. Press and hold TENS/NMS SET/ESC button for 3 seconds to enter custom
programme parameter adjustment menu
3. Flashing Hz symbol indicates that frequency can be adjusted. Use " CHB
+" or CHB - to adjust frequency in range from 2 � 200 Hz (selectable Hz
values: 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 15, 20, 25, 30, 35, 40, 50, 60, 70, 80,
100, 150 , 200)
4. Press "CHA+" button to change to Pulse Width adjustment screen. Flash�
ing µS segment indicates that pulse width can be adjusted. Use "CHB
+" or "CHB - " button to adjust the width in range from 50 � 300 µS.
( selectable µS values: 50, 75, 100, 125, 150, 175, 200, 220, 250, 275, 300)
5. Once Pulse width has been adjusted press SET/ESC button to save set�
tings and return to Home screen.
If "CHA+" or "CHB �" button was pressed again rather than SET/ESC then
the device would loop back to the Hz adjustment screen .
6. Repeat above procedure to readjust custom programme.
Custom NMS programme (PC2, PC3)
1. Select PC2 or PC3 by pressing TENS/NMS PROG. button
2. Press and hold TENS/NMS SET/ESC button for 3 seconds to enter custom
programme parameter adjustment menu.
3. Flashing Hz symbol indicates that frequency can be adjusted.
Use " CHB +" or CHB - to adjust frequency in range from 2 � 100 Hz (se�
lectable Hz values: 2, 3, 4, 5, 6, 7, 8 , 9, 10, 12, 14, 15, 20, 25, 30, 35, 40, 50,
60, 70, 80, 100 )
4. Press "CHA+" button to change to Pulse Width adjustment screen. Flash�
ing µS segment indicates that pulse width can be adjusted. Use "CHB
+" or "CHB - " button to adjust the width in range from 50 � 450 µS.
( selectable µS values: 50, 75, 100, 125, 150, 175, 200, 220, 250, 275, 300,
450 )
NeuroTrac™ IFC Rehab Operation Manual
13