Section 4 - Security
It s recommended to enable encrypton on your wreless router before your wreless network adapters. Please establsh wreless connectvty before
enablng encrypton. Your wreless sgnal may degrade when enablng encrypton due to the added overhead.
1.. Log nto the web-based configuraton by openng a web browser and
enterng the IP address of the router (192.168.0.1). Clck on.Setup.and
then clck.Wireless.Settings on the left sde.
2. Next to Security Mode, select WPA-Personal.
3. Next to WPA Mode, select Auto, WPA2.Only, or.WPA.Only. Use Auto f
you have wreless clents usng both WPA and WPA2.
4. Next to Cypher Type, select TKIP. and. AES, TKIP, or AES. If you have
wreless clents that use both types, use TKIP.and.AES.
5. Next to Group Key Update Interval, enter the amount of tme before the
group key used for broadcast and multcast data s changed (3600 s
default).
6. Next to Pre-Shared Key, enter a key (passphrase). The key s entered as a
pass-phrase n ASCII format at both ends of the wreless connecton. The
pass-phrase must be between 8-63 characters.
7. Clck Save. Settings to save your settngs. If you are configurng the
router wth a wreless adapter, you wll lose connectvty untl you enable
WPA-PSK on your adapter and enter the same passphrase as you dd on
the router.
D-Lnk DIR-615 User Manual
Configure WPA-Personal (PSK)
84