Connect To Another Router - D-Link DIR-615 User Manual

Wireless n router
Hide thumbs Also See for DIR-615:
Table of Contents

Advertisement

Section 2 - Installation
If you are connectng the D-Lnk router to another router to use as a wreless access pont and/or swtch, you wll have to do the followng before
connectng the router to your network:
• Dsable UPnP
• Dsable DHCP
• Change the LAN IP address to an avalable address on your network. The LAN ports on the router cannot accept a DHCP address
from your other router.
To connect to another router, please follow the steps below:
1. Plug the power nto the router. Connect one of your computers to the router (LAN port) usng an Ethernet cable. Make sure your IP address on
the computer s 192.168.0.xxx (where xxx s between 2 and 254). Please see the Networking.Basics secton for more nformaton. If you need
to change the settngs, wrte down your exstng settngs before makng any changes. In most cases, your computer should be set to receve an
IP address automatcally n whch case you wll not have to do anythng to your computer.
2. Open a web browser and enter http://192.168.0.1 and press Enter. When the logn wndow appears, set the user name to Admin and leave
the password box empty. Clck Log.In to contnue.
3. Clck on Advanced and then clck Advanced.Network. Uncheck the Enable UPnP checkbox. Clck Save.Settings to contnue.
4. Clck Setup and then clck Network.Settings. Uncheck the Enable DHCP Server server checkbox. Clck Save.Settings to contnue.
5. Under Router Settngs, enter an avalable IP address and the subnet mask of your network. Clck Save.Settings to save your settngs. Use ths
new IP address to access the configuraton utlty of the router n the future. Close the browser and change your computer's IP settngs back to
the orgnal values as n Step 1.
6. Dsconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable n one of the LAN ports of the router and connect t to your other router. Do not plug anythng nto the Internet port
of the D-Lnk router.
8. You may now use the other 3 LAN ports to connect other Ethernet devces and computers. To configure your wreless network, open a web
browser and enter the IP address you assgned to the router. Refer to the Configuration and Wireless Security sectons for more nformaton
on settng up your wreless network.
D-Lnk DIR-615 User Manual

Connect to Another Router

10

Advertisement

Table of Contents
loading

Table of Contents