Dhcp Reservation - D-Link DIR-615 User Manual

Section 3 - Configuration
If you want a computer or devce to always have the same IP address assgned, you can create a DHCP reservaton. The router wll assgn the IP
address only to that computer or devce.
Note: This IP address must be within the DHCP IP Address Range.
Enable:
Check ths box to enable the reservaton.
Computer Name:
Enter the computer name or select from the drop-down menu
and clck <<.
IP Address:
Enter the IP address you want to assgn to the computer or
devce. Ths IP Address must be wthn the DHCP IP Address
Range.
MAC Address:
Enter the MAC address of the computer or devce.
Copy Your PC's MAC
If you want to assgn an IP address to the computer you are
Address:
currently on, clck ths button to populate the fields.
Save:
Clck Save to save your entry. You must clck Save.Settings at
the top to actvate your reservatons.
Dynamic DHCP
In ths secton you can see what LAN devces are currently
Clients:
leasng IP addresses.
Revoke:
Clck Revoke to cancel the lease for a specfic LAN devce and
free an entry n the lease table. Do ths only f the devce no
longer needs the leased IP address, because, for example, t
has been removed from the network.
Note: The Revoke option will not disconnect a PC with a current network session from the network; you would need to use MAC Address Filter to do that. Revoke will
only free up a DHCP Address for the very next requester. If the previous owner is still available, those two devices may both receive an IP Address Conflict error, or the
second device may still not receive an IP Address; in that case, you may still need to extend the "DHCP IP Address Range" to address the issue, it is located in the DHCP
Server section.
Reserve:
The Reserve opton converts ths dynamc IP allocaton nto a DHCP Reservaton and adds the correspondng entry to the DHCP Reservatons Lst.
D-Lnk DIR-615 User Manual

DHCP Reservation

29