Statically Assign An Ip Address - D-Link DIR-615 User Manual

Appendix B - Networking Basics

Statically Assign an IP address

If you are not usng a DHCP capable gateway/router, or you need to assgn a statc IP address, please follow the steps below:
Step.1
Wndows ® 7 - Clck on Start > Control.Panel > Network.and.Internet > Network.and.Sharing.Center > Change.Adapter.Setting..
Wndows Vsta ® - Clck on Start > Control.Panel > Network.and.Internet > Network.and.Sharing.Center > Manage.Network.Connections.
Clck on Start > Control.Panel > Network.Connections.
Wndows ® XP -
2000 - From the desktop, rght-clck My.Network.Places > Properties.
Wndows ®
Step.2
Rght-clck on the Local.Area.Connection whch represents your network adapter and select Properties.
Step.3
Hghlght Internet.Protocol.(TCP/IP) and clck Properties.
Step.4
Clck Use.the.following.IP.address and enter an IP address that s on the same subnet as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address s 192.168.0.1, make your IP address 192.168.0.X where X s a
number between 2 and 99. Make sure that the number you choose s not n use on the network. Set
Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Prmary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS s not
needed or you may enter a DNS server from your ISP.
Step.5
Clck OK twce to save your settngs.
D-Lnk DIR-615 User Manual 111