Table of Contents
Advertisement
Divar - Easy | Installation Manual | Operating instructions
Search mode
Press the search key
to open the search menu. Use the search menu to
search for stored video recordings.
PLAYBACK SEARCH
SEARCH EVENT FILTER
CAMERA
SEARCH DIRECTION
START TIME
END TIME
START SEARCH
DISK CONTENTS
EARLIEST TIME
LATEST TIME
FILTER
>> SEARCH CRITERIA
•
Set the Event filter to search for only alarm events, only motion events or
both.
•
Set to None so that the search is not restricted by events.
•
Specify the cameras to search for. The selected cameras are shown at the
bottom of the menu with a check mark. Press a camera key to change the
selection.Select Forward to search from start time to end time or
Backward to search from end time to start time.
•
Fill in a time and date from which to start the search.
•
Fill in an end time and date to limit the time span of the search.
•
Select Start Search (or press F2) to initiate the search procedure.
•
Press the escape key
to exit the search mode and return to the
previous mode.
Bosch Security Systems
ALARM/MOTION
ALL
FORWARD
2002-03-14 13:00
2002-03-14 14:00
>
2002-03-14 14:00
2002-06-19 20:23
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16
>> SEARCH RESULTS
•
The recording fitting the filter and closest to the selected date and time is
shown first.
•
Use the up/down arrow keys to move through a long list. The selected
recording is shown.
•
Press the select key
for a full-screen playback of the selected
recording.
•
Press the search key
during playback to return to the list.
•
Press the escape key
to return to the filter menu.
PLAYBACK SEARCH
SEARCH RESULTS
CAMERA 1
MOTION
EN | 3-9
2002-03-14 15:00:17
Advertisement
Table of Contents
