Mitsubishi Electric PAR-31MAA Instruction Book page 39

4
Auto return
Cool: After
back to
Heat: After
back to
Select:
Cursor
Auto return
Cool:
Heat:
Changes saved
Main menu:
The above Timer or Preset temperature settings will not be effective when the Temp. range is
restricted and when the system is centrally controlled (when the Temp. range setting from local
controller is prohibited). When the system is centrally controlled (when Timer operation from
local remote controller is prohibited), only the Timer setting will be ineffective.
<Sample screens when the Auto return function is enabled>
Example: Lower the Set temp. to 24ºC (75ºF). 60 minutes later, the Set temp. will be back to 28ºC (83ºF).
Cool Set temp.
Mode Temp.
Auto return
No / Yes
min
min
Content
Auto return
Yes
min,
min,
Fri
Auto Cool
Fan Mode
The Set temp. is changed
from 28ºC (83ºF) to 24ºC
(75ºF) by a user.
Change the settings with the F3 or F4 button.
Auto return: No (disable)/Yes (enable)
•
Cool: Timer setting range is 30 to 120 minutes
•
in 10-minute increments.
Temperature setting range is 19 to 30ºC
(67 to 87ºF) (1ºC increments).
Heat: Timer setting range is 30 to 120 minutes
•
in 10-minute increments.
Temperature setting range is 17 to 28ºC
(63 to 83ºF) (1ºC increments).
Press the SELECT button to save the settings.
"Cool" includes "Dry" and "AUTO Cooling"
modes, and "Heat" includes "AUTO Heating"
mode.
The screen to set the selected item will appear.
Navigating through the screens
• To go back to the Main menu ........... MENU button
• To return to the previous screen ...... RETURN button
60
Fri
minutes
later
Set temp. Auto
Temp. Fan
Cool Set temp. Auto
Mode Temp. Fan
60 minutes later, the Set
temp. returns to 28ºC (83ºF)
automatically.
Fri
39