Download  Print this page

Operation Mode, Temperature, And Fan Speed Settings - Mitsubishi Electric PAR-31MAA Instruction Book

City multi control system and mitsubishi mr. slim air conditioners ma remote controller.
Hide thumbs

Advertisement

Basic operations

Operation mode, temperature, and fan speed settings

Button operation
Operation mode
Cool
Mode
What the blinking mode icon means
The mode icon will blink when other indoor units in the same refrigerant system (connected to the same
outdoor unit) are already operated in a different mode. In this case, the rest of the unit in the same
group can only be operated in the same mode.
<AUTO (dual set point) mode>
When the operation mode is set to the Auto (dual set point) mode, two preset
temperatures (one each for cooling and heating) can be set. Depending on the room
temperature, indoor unit will automatically operate in either the Cool or Heat mode
and keep the room temperature within the preset range.
The graph below shows the operation pattern of indoor unit operated in the Auto
(dual set point) mode.
Preset temp.
(COOL)
Preset temp.
(HEAT)
14
Fri
Room
Set temp.
Auto
Temp.
Fan
Operation pattern during Auto (dual set point) mode
HEAT
Press the F1 button to go through the operation
modes in the order of "Cool, Dry, Fan, Auto, and
Heat." Select the desired operation mode.
Cool
Auto
•Operation modes that are not available to the connected
indoor unit models will not appear on the display.
The room temperature
changes corresponding
to the change in the
outside temperature.
COOL
HEAT
ON
Dry
Fan
Heat
Room temperature
COOL

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric PAR-31MAA

This manual is also suitable for:

Par-32maaPar-32maag

Comments to this Manuals

Symbols: 0
Latest comments: