Controller operation-Function settings
OU silent mode
Select "Timer" from the Main menu (refer to page
20), and press the SELECT button.
The On/Off timer will not work in the following cases:
when On/Off timer is disabled, during an error, during
check (in the service menu), during test run, during
remote controller diagnosis, when the clock is not set,
during Function setting, when the system is centrally
controlled (when On/Off operation or Timer operation from
local remote controller is prohibited).
The current settings will appear.
Move the cursor to the On/Off timer, and press
the SELECT button.
The screen to set the timer will appear.
Select the desired item with the F1 or F2
button out of "On/Off timer," "On," "Off," or