Margins And Print Area - Panasonic KX-P7100 Service Manual

KX-P7100
Recommended Media
Transparency:
· To avoid damaging the printer, do not use ink jet transparency.
· Transparencies and adhesive material of labels should be stable at 205°C ( 400°F ), the printer's maximum temperature.
· Re-using transparencies that have been fed through the printer once ( for example, after jams or if the transparency is ejected
without being printed ) can reduce the life of the consumables and paper path components.
· When using transparencies, if the print quality is poor, print on the other side.
Labels:
· With any label stock, the labels must completely cover the backing material.
Envelope:
It is recommended that you purchase only high quality envelopes with diagonal seams, as shown in the diagram below:
High quality envelopes have the following characteristics:
· A thin, sharply creased leading edge
· Paper weight of 90 g/m
· Flat, free of curls, wrinkles, nicks, etc.
Note:
Wrinkles may occur, even when using high quality envelopes.
1.1.4.2.

Margins and Print Area

The image ( print area ) is printed a bit smaller than the media size. 4.2 mm ( 0.17" ) is required for top, bottom and side margins.
It may be needed to adjust the page margins in the application software to match the allowable printarea.
2
( 24 lbs. )
8