Panasonic KX-P7100 Service Manual page 40

KX-P7100
3.11.4. Thermostat
(1) Remove the 2 screw ( A ) and Thermal Fuse.
(2) Remove the screw ( B ) and Thermostat.
Caution :
· When reinstalling the thermostat, both end terminals must be positioned under the terminals of thermal fuse and
lead wire as shown in the following figure, or thermostat cannot properly measure the surface temperature of the
heat roller becausethe distance between the surface of heat roller and thermostat may change.
· When reinstalling the thermal fuse and thermostat, the screws must be tightened in order (1), (2), (3) to position
them correctly as shown in the following figure.
40